Alu-Cab Canopy Camper Rear Filler Panel for Jeep Gladiator - By Eight13 Fabrications & Designs

Solid filler panel or with holes to mount your camera!

The lower filler panel is designed to fill in the gap between the bottom of the rear door and the Jeep Gladiator bumper. We offer a solid version as well as a version to mount your rear backup camera. With the rear backup camera version there is also an optional camera extension cable available.  With the filler panel, you can hide any propane lines or electrical wiring that may be running under the rear of the camper. 

For the Camera Version of the Filler Plate:

The Jeep Gladiator has two camera options depending on the options your truck is equipped with. Your camera should line up with two of the four holes. Two holes are all that is required to mount the camera securely. Since the camera is mounted flat, your backup camera guidelines will be offset. However, the camera’s range of view is greatly improved. You can turn off the backup guidelines in your rear camera settings if desired.

Be sure to store the included 4mm wrench with your tire change kit if you have the spare tire in the factory location. The filler plate intentionally covers the tool insertion opening needed to access your spare tire. You will need to remove the five screws holding the filler plate in place and sit it on the bumper while removing your spare from under the truck. Since the filler plate is designed to have a clean appearance, we did not include a hole in the filler plate to accommodate insertion of the spare tire tool. 

Made from black texture powder coated 1/8" aluminum with stainless steel hardware.